Eagle Pro 3m Angled Jack to Jack Instrument Cable – Bespeco EAJP300
The Eagle Pro 3m Angled Jack to Jack Instrument Cable from Bespeco’s Eagle Pro Series, model EAJP300, is built for musicians and audio professionals who want premium shielding, a tough gold-plated connection, and dependable performance night after night. With one straight 6.3 mm mono jack and one right-angled 6.3 mm jack, this Eagle Pro 3m Angled Jack to Jack Instrument Cable gives you a clean, low-profile connection at the instrument end while keeping a standard straight plug for the amp, pedal, or interface side.
Measuring 3 meters in length, this Italian-made cable is sized for pedalboard runs, guitar-to-amp connections, and short studio patches where a tidy, reliable signal path matters more than sheer distance. As an angled jack to jack instrument cable, it’s long enough to give you room to move on a small stage or in a rehearsal space, but short enough to avoid the extra capacitance and unnecessary clutter that comes with longer runs you don’t actually need.
The Eagle Pro series sits at the top of Bespeco’s instrument cable range, and the Eagle Pro 3m Angled Jack to Jack Instrument Cable shows why—double-layer shielding, silicone-reinforced jacketing, and gold-plated Bespeco connectors built to handle years of stage and studio use. Where entry-level cables cut corners on shielding or use generic connectors, this cable is engineered as a complete package, addressing conductor quality, noise rejection, physical durability, and connector reliability all at once, rather than treating any one of them as an afterthought.
Built for Serious Signal Integrity
At its core, the Eagle Pro 3m Angled Jack to Jack Instrument Cable features a 0.25 mm² central conductor of 99% pure Oxygen Free Copper (O.F.C.), made up of 30 strands of 0.10 mm copper wire. This fine-stranded construction keeps resistance low and flexibility high, delivering a clean, full-frequency signal without dulling your instrument’s natural tone. The multi-strand approach also means the cable holds up far better under the repeated flexing, coiling, and stage movement that solid-core conductors tend to fatigue and break under over time.
Oxygen Free Copper’s low oxidation rate is a genuine practical advantage here, not just a spec-sheet buzzword. Less internal oxidation over the cable’s working life means signal-carrying capacity stays consistent for years rather than gradually degrading, which is exactly what you want from an angled jack to jack instrument cable that’s going to spend its life being packed, unpacked, and stepped on.
Whether you’re running into tube amps, boutique pedals, or a clean DI chain, this cable is engineered to pass your signal through exactly as it left your instrument—uncoloured, uncompressed, and free of unwanted noise. That transparency matters most when you’re chasing a specific tone: a cable that adds its own character, however subtle, works against you the moment you start dialling in amp settings or pedal parameters to compensate for it.
Dual-Layer Shielding for Near-Total Noise Rejection
Noise kills tone, and the Eagle Pro 3m Angled Jack to Jack Instrument Cable is built to keep it out. The conductor is first wrapped in a semi-conductive PVC jacket with added graphite, which suppresses the crackling and popping caused by cable flex and handling—a problem plain PVC-jacketed cables are prone to, especially once they’ve been coiled and uncoiled a few hundred times. This inner layer specifically targets triboelectric noise, the static-like interference generated by friction inside the cable itself, which conventional single-layer shielding does little to address.
Over that sits a second shielding layer of spiral-wound OFC copper wire with better than 96% coverage, giving this cable stronger protection against electromagnetic and radio-frequency interference than Bespeco’s standard-tier cables. This combination of graphite-loaded inner shielding and dense spiral copper outer shielding is a genuine step up from single-layer designs, and it shows in real-world use: less hum near dimmer packs and power supplies, less buzz near wireless transmitters, and a noticeably quieter noise floor even with high-gain amp settings.
Whether you’re squeezed onto a crowded stage full of lighting rigs and wireless gear, or tracking in a studio surrounded by power cables and monitors, the Eagle Pro 3m Angled Jack to Jack Instrument Cable keeps your signal quiet and your tone intact. For players who’ve fought ground loop hum or unexplained buzz with cheaper cables, this level of shielding is often the difference that actually solves the problem.
Angled Design for Practical Rigging
The right-angle jack on one end is purpose-built for tight spaces—side-mounted guitar and bass jacks, low-profile pedalboards, and combo amps sitting flush against a wall or case. As an angled jack to jack instrument cable, the design reduces strain on your instrument’s output jack, lowers the risk of accidental unplugging, and keeps your cable management tidy without giving up any signal quality.
This isn’t just about tidiness. A straight jack sticking out from the side of a guitar body is one of the most common points of cable failure and jack damage on stage, catching on straps, clothing, and nearby gear during energetic performances. The right-angle connector sits flush against the body, dramatically reducing leverage on the jack and the solder joints inside it.
Paired with a straight jack on the opposite end, the Eagle Pro 3m Angled Jack to Jack Instrument Cable offers flexible routing whether you’re plugging into a top-mounted amp input, a pedal, or an audio interface. That mixed configuration is deliberate: most amps, pedals, and interfaces have their jacks positioned in a way that suits a straight plug, while the instrument end benefits far more from the low-profile angled connector.
Rugged PVC and Silicone Jacket
The Eagle Pro 3m Angled Jack to Jack Instrument Cable is wrapped in a PVC and silicone outer jacket, combining the toughness needed for touring with the flexibility needed for daily handling. It resists kinks and abrasion while staying soft enough to coil quickly between sets, without the jacket stiffening up or cracking the way lower-grade PVC does after repeated cold-weather load-ins and warm stage conditions.
At 6.5 mm overall diameter, it’s substantial enough to protect the internal shielding without becoming bulky on a crowded pedalboard. That balance matters more than it might seem: too thin, and the shielding underneath is more vulnerable to damage from being trodden on or crushed under flight cases; too thick, and the cable becomes unwieldy to route neatly around densely packed effects units.
From nightly stage use to constant studio patching, this angled jack to jack instrument cable is built to hold up under the kind of repetitive handling that wears out cheaper cables within a season.
Gold-Plated Connectors Built to Last
Both ends of the Eagle Pro 3m Angled Jack to Jack Instrument Cable are terminated with Bespeco’s own Eagle Pro connectors—a straight S60BKB jack and an angled S60BKA jack—finished with gold-plated contacts for a low-resistance connection that resists corrosion over years of repeated plugging and unplugging. Gold’s resistance to oxidation means the contact surface stays clean and conductive far longer than nickel-plated alternatives, which is particularly valuable on cables that get connected and disconnected multiple times a day.
The connector housings are matched precisely to the cable’s outer diameter, giving a secure strain-relief fit right at the solder joint. That precision fit is what prevents the internal wiring from working loose at the connection point over time—a common failure mode in cables where the housing doesn’t properly grip the cable jacket, leaving all the mechanical stress on the solder joints themselves.
Italian Design You Can Trust
Manufactured in Italy under Bespeco’s strict quality controls, the Eagle Pro series reflects the company’s top-tier approach to cable engineering—premium materials, double shielding, and connectors built to outlast the gear around them. Every stage of production, from conductor stranding to final connector assembly, follows the same rigorous standards Bespeco applies across its entire cable range.
The Eagle Pro 3m Angled Jack to Jack Instrument Cable carries forward Bespeco’s reputation among working musicians and sound professionals across Europe and beyond, built on decades of manufacturing experience rather than chasing short-term cost savings at the expense of reliability.
Specifications
- Cable Type: Angled Jack to Jack Instrument Cable
- Length: 3 meters
- Connectors: 1 x straight 6.3 mm mono jack (S60BKB), 1 x angled 6.3 mm mono jack (S60BKA)
- Conductor Area: 0.25 mm²
- Conductor Structure: 30 x 0.10 mm, 99% pure OFC (Oxygen-Free Copper)
- Shielding: Semi-conductive PVC + graphite layer, plus spiral copper wire shielding at >96% coverage
- Outer Jacket: PVC and silicone
- Outer Diameter: 6.5 mm
- Connector Finish: Gold-plated contacts
- Color: Black
- Country of Origin: Made in Italy
Conclusion
The Eagle Pro 3m Angled Jack to Jack Instrument Cable delivers what serious musicians and audio professionals demand—clean tone, near-total noise rejection, and connectors built to last. Whether you’re dealing with tight pedalboard layouts, a noisy stage, or a busy studio full of interference sources, this Bespeco EAJP300 gives you a dependable, quiet signal path that holds up to years of regular use.
Built with pure OFC copper, dual-layer shielding, and Italian precision, the Eagle Pro 3m Angled Jack to Jack Instrument Cable is more than just a cable—it’s a signal path engineered to disappear, so your tone comes through exactly as intended, gig after gig.
For players who need that angled jack convenience with the added confidence of top-tier shielding and connector durability, this is the cable for the job.
View more Bespeco products HERE
About Bespeco:
Bespeco an Italian Company designing, engineering, manufacturing and commercializing accessories for musical instruments. Through constant cooperation with musicians, sound technicians and engineers, they are able to build functional, sturdy and durable products, each with its own distinctive design. High quality accessories that will always come with you. Wherever you find music, you always find an accessory: be it a cable, a guitar stand, a microphone stand, a case to protect your instrument and many more.
