Description
The iSEMcon EMX-7150 is an industry standard worldwide when it comes to sound system measurements using Smaart Acoustical Analysis Software.
The EMX-7150 is a ¼” microphone made from stainless steel and using state of the art watertight Neutrik*3 connectors have a very accurate frequency response combined with the capability to measure high sound pressure levels up to 145dBspl. It is a low impedance measurement microphone that can be operated from 12…52 V Phantom Power which is available on most professional microphone preamplifiers and professional computer interfaces. With its mechanically robust design it is well suited for harsh environment use such as open-air sound reinforcement measurements.
Its class 1 frequency response (NOTE: NOT A CLASS 1 MICROPHONE)*1 makes it predestined for room acoustics analysis including recording studios and home theatres. It can normally be used without the included free field calibration data file for compensation. In this case take the individual calibration data as proof of its superb performance.
The EMX-7150 should not be plugged or unplugged into a mixer console or PA system unless the input channel is muted. If the system does not have a muting option the volume should be turned off. This avoids loud popping noise that can cause damage in speakers and/or affect your hearing.
The super protection windshield SWS -7 is highly recommended for open air use when possibilities of limited amounts of spraying or trickling water can impact the microphone.
TYPICAL APPLICATIONS
- Sound-power and sound-field analysis
- Industrial Acoustics
- Room acoustics analysis
- Sound reinforcement
- Real time analysers
iSEMcon EMX-7150 KEY FEATURES
- Capsule: ¼” Condenser
- Polar Pattern: Omnidirectional
- Frequency Response Characteristic: Free Field
- Frequency Range: 10 Hz – 20,000 Hz (Exact value indicated in calibration file)
- Sensitivity: 6 mV/Pa, typical (Exact value indicated in calibration file)
- Operating Voltage: 9-52V DC Phantom Power
- Max SPL: 145 dB SPL typical @ 3% THD
- Conformity: IEC 61000-6-1; IEC 61010-1
What is included
- 1x EMX-7150 Microphone
- 1x mic clamp with adapter screw
- 1x Windscreen
- my.isemcon calibration file instruction card
